Best Quality EMC DES-3128 Exam Questions ExamPrepAway Realistic Practice Exams [2023]
Critical Information To Specialist - Implementation Engineer, NetWorker Exam Pass the First Time
NEW QUESTION # 24
An administrator is creating an action resource in NetWorker. What must exist before this action can be completed?
- A. a workflow
- B. a notification
- C. a protection group
- D. a client
Answer: C
NEW QUESTION # 25
In a NetWorker environment, a daily scheduled backup was started. However, the volume did not mount, and the backup failed.
What is the reason for the failure?
- A. Protection group is not selected on the pool.
- B. Tape volumes attached to the NetWorker server are recyclable.
- C. There are no appendable volumes that match the pool.
- D. Volumes labeled in the required pool are appendable.
Answer: D
NEW QUESTION # 26
A backup administrator is deploying an extended client on a Linux host. The following error is observed during the installation:
Cannot contact a portmapper on port 7937
What is the recommended action to resolve this issue?
- A. Install the lgtoclnt-[version].rpm package and reinstall the Extended client.
- B. Install the lgtoserv-[version] rpm package and reinstall the Extended client.
- C. Install the lgtonode-[version].rpm package and reinstall the Extended client.
- D. Install the Lgtobbb-[version].rpm package and reinstall the Extendd client
Answer: B
Explanation:
The error "Cannot contact a portmapper on port 7937" indicates that the portmapper service, which is required for the NetWorker Extended Client installation, is not running on the Linux host. The recommended action to resolve this issue is to install the lgtoserv-[version] rpm package and reinstall the Extended client. The other options are not related to this process.
NEW QUESTION # 27
Which commands can be used to locate the bootstrap SSID on a backup volume?
- A. mminfo and nsrck
- B. nstinfo and mminfo
- C. scanner and mminfo
- D. nsrnm and scanner
Answer: C
NEW QUESTION # 28
A backup administrator is performing a Block-Based Backup of a RHEL Server and it fails What is the cause of the issue?
- A. PSS is enabled for target Data Domain devices.
- B. AFTD device is enabled for Client Direct.
- C. LVM or VxVM are enabled on the OS level.
- D. The Igtobbb package is not installed.
Answer: B
NEW QUESTION # 29
Which virtual environments are supported by NetWorker to back up virtual machines?
- A. Microsoft Hyper-V and Citrix XEN
- B. Citrix XEN and VMware
- C. VMware and Microsoft Hyper-V
- D. KVM and Microsoft Hyper-V
Answer: C
Explanation:
NetWorker supports both VMware and Microsoft Hyper-V virtual environments for backing up virtual machines.
NEW QUESTION # 30
Which monitoring tool is used to view current device operations, active sessions, messages concerning recent activity, and any pending messages?
- A. nsrwatch
- B. nsradmin
- C. NetWorker Character-Based Interface
- D. Networker WebUser Interface
Answer: D
NEW QUESTION # 31
What is the minimum number of served licenses required for a customer with 5 datazones and 2 additional storage nodes per datazone?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 32
A backup administrator needs to create a new NSR Client "ABC 123" and PSS file system backup save sets /data01 and /data02. They also need to create a skip files directive named "Skip GO" for* go extensions anywhere underdata02 Use the simulator to achieve this When you have finished, continue to the next question.
Answer:
Explanation:
Send the feedback for this answer.
NEW QUESTION # 33
A NetWorker server is utilizing a remote storage node. There is a PowerProtect DD appliance with two VTLs configured, and it is attached to the storage node via Fiber Channel. There is also a physical media library attached to the same storage node.
How many nsrlcpd processes are running on the storage node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 34
What is a feature of the CloudBoost appliance?
- A. replaces the PowerProtect DD series appliance
- B. enables the transfer of backups to cloud storage
- C. enables the transfer of backups to Dell EMC Cloud Tier
- D. replaces the PowerProtect DDVE appliance
Answer: D
NEW QUESTION # 35
What is the minimum number of served licenses required for a customer with 5 datazones and 2 additional storage nodes per datazone?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
The minimum number of served licenses required for a customer with 5 datazones and 2 additional storage nodes per datazone is 7. This is because each datazone requires a minimum of 1 served license, and each additional storage node requires an additional served license. The other options are not related to this process.
NEW QUESTION # 36
A backup administrator has installed a NetWorker Server on a Windows 2019 host. The installation finished successfully. When the NMC Launcher started and the backup server's name is specified as the NMC server, the following error is observed.
Unable to connect the NMC server
The administrator determined the NMC was not installed. What is the recommended action to resolve the issue?
- A. Open a service request with Dell Technologies.
- B. Rerun the installation and enable the NMC option.
- C. Run the lgtonmc-[version].exe installation executables.
- D. Run the lgtoxtdcint-fversionJ.exe installation executable.
Answer: A
NEW QUESTION # 37
An administrator already added a client "CLientA" This client has recently been assigned a second DNS named "ClientAB" When the backup ran, the following error is observed
"The client ClientAB is not in backup servers' clients list."
Use the simulator to resolve this issue
When you have finished, continue to the next question
Answer:
Explanation:
Send the feedback for this answer.
NEW QUESTION # 38
Which NetWorker component is comprised of a single NetWorker Server, its clients, and storage nodes?
- A. save set
- B. protection group
- C. datazone
- D. media pool
Answer: C
Explanation:
A datazone is a NetWorker component composed of a single NetWorker Server, its clients, and storage nodes. It is used to define a group of systems and storage nodes that will share the same configuration. The media pool, save set, and protection group are all related to NetWorker, but they are not components of a datazone.
NEW QUESTION # 39
What port is required tor NMC access?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 40
An administrator wants to create a client "ABO" to back up alt critical volumes for disaster recovery. They want the backup utility to scan a volume or a disk m a file system and back up all the blocks that are in use in the file system Also, the user has a feature that allows for a single high-density file system to be spirt into multiple concurrent save sets to speed up the backup walk process. The client must send 6 save sets simultaneously in a backup.
Use the simulator to perform the task
When you have finished, continue to the next question.
Answer:
Explanation:
The steps to create a client "ABO" to back up critical volumes for disaster recovery and to use the feature that allows for a single high-density file system to be split into multiple concurrent save sets are as follows:
Create the client:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the Add button.
In the Client Name field, enter "ABO".
In the Client Address field, enter the IP address or hostname of the client.
In the Platform field, select the appropriate platform for the client.
Click on the OK button to create the client.
Configure the client:
Go to the Clients tab.
Click on the ABO client.
Go to the File Systems tab.
Click on the Add button.
In the File System field, enter the path of the critical volume that needs to be backed up.
In the Save Set field, enter a name for the save set.
Check the Include all blocks that are in use option. This will ensure that all blocks that are in use in the file system are backed up.
Click on the OK button to add the file system.
Configure the save set:
Go to the Clients tab.
Click on the ABO client.
Go to the Save Sets tab.
Click on the save set that you just created.
Go to the Advanced tab.
In the Save Set Options field, enter "PSS:streams_per_ss=6". This tells NetWorker to split the save set into 6 concurrent save sets and send them simultaneously in a backup.
Click on the OK button to save the changes.
Schedule the backup:
Go to the Clients tab.
Click on the ABO client.
Go to the Schedules tab.
Click on the Add button.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you just created.
Click on the OK button to schedule the backup.
NEW QUESTION # 41
An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?
- A. NetWorker Extended Client software is required.
- B. Logical Volume Manager is required.
- C. No additional software is required.
- D. NetWorker Block-based Backup software is required.
Answer: D
NEW QUESTION # 42
A backup administrator needs to create a new NSR Client "ABC 123" and PSS file system backup save sets /data01 and /data02. They also need to create a skip files directive named "Skip GO" for * go extensions anywhere under data02 Use the simulator to achieve this When you have finished, continue to the next question.
Answer:
Explanation:
To create a new NSR Client "ABC 123" and PSS file system backup save sets /data01 and /data02, and a skip files directive named "Skip GO" for * .go extensions anywhere under /data02, the administrator can use the Networker CLI (Command Line Interface) to access the Networker server and create the NSR Client, PSS file system backup save sets, and skip files directive. Here are the steps:
Log in to the Networker CLI by entering the following command:
nsr_client -C ABC 123
Once logged in, create a new PSS file system backup save set for /data01 by running the following command:
savefs -p -s /data01
Create a new PSS file system backup save set for /data02 by running the following command:
savefs -p -s /data02
Create a skip files directive named "Skip GO" for * .go extensions anywhere under /data02 by running the following command:
savefs -p -s /data02 -k "* .go"
Verify that the new NSR client, PSS file system backup save sets and skip files directive have been created by running the following command:
nsr_client -l
Verify that the new PSS file system backup save sets are correctly associated with the new NSR client by running the following command:
nsr_client -G ABC 123
NEW QUESTION # 43
......
DES-3128 EXAM DUMPS WITH GUARANTEED SUCCESS: https://skillmeup.examprepaway.com/EMC/braindumps.DES-3128.ete.file.html