CCNA 200-301 Practice Test Engine: Try These 1800 Exam Questions
Guaranteed Success in CCNA 200-301 Exam Dumps
How to book the 200-301 CCNA Exam: Cisco Certified Network Associate
You can schedule the exam anytime at Cisco/certifications. You can pay directly from a credit card or redeem a voucher purchased from.
CCNA Certification Details
Attaining the new Cisco CCNA certification marks a critical step in building a career in information technology. This certification provides a detailed understanding of security fundamentals, IP services, IP connectivity, network fundamentals, and network access. Unlike in the past where students would attempt a series of exams to attain a Cisco certification at the associate level, today, they can certify by simply passing one exam coded 200-301.
To prepare for the Cisco 200-301 certification exam, candidates can take advantage of various study materials, including official Cisco training courses, study guides, and practice exams. They can also join online communities and forums to interact with other candidates and network professionals. Cisco Certified Network Associate Exam certification exam is a valuable credential for network professionals who want to enhance their career prospects and stay up-to-date with the latest networking technologies.
NEW QUESTION # 321
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 322
Refer to the exhibit.
Load-balanced traffic is coming in from the WAN destined to a host at 172.16.1.190. Which next-hop is used by the router to forward the request?
- A. 192.168.7.7
- B. 192.168.7.4
- C. 192.168.7.40
- D. 192.168.7.35
Answer: C
NEW QUESTION # 323
Which set of methods is supported with the REST API?
- A. GET, POST, MOD, ERASE
- B. GET, PUT, POST, DELETE
- C. GET, POST, ERASE, CHANGE
- D. GET, PUT, ERASE, CHANGE
Answer: B
Explanation:
Using HTTP Methods for RESTful Services
The HTTP verbs comprise a major portion of our "uniform interface" constraint and provide us the action counterpart to the noun-based resource. The primary or most-commonly-used HTTP verbs (or methods, as they are properly called) are POST, GET, PUT, PATCH, and DELETE. These correspond to create, read, update, and delete (or CRUD) operations, respectively. There are a number of other verbs, too, but are utilized less frequently. Of those less-frequent methods, OPTIONS and HEAD are used more often than others.
NEW QUESTION # 324
What is the central role of a hypervisor in a virtualized environment?
- A. Allow a single guest operating system to run on the physical server.
- B. Present virtualized hardware to a guest operating system.
- C. Support many applications to run on a shared guest operating system.
- D. Create a single library environment for many operating systems.
Answer: B
Explanation:
A hypervisor is software that creates and manages virtual machines (VMs) by virtualizing the physical hardware of a host system. It presents a layer of virtualized hardware to each guest operating system, allowing multiple OS instances to run concurrently on a single physical machine. The hypervisor manages CPU, memory, storage, and networking resources among the VMs, ensuring they operate independently from each other.
NEW QUESTION # 325
What is a function of Wireless LAN Controller?
- A. monitor activity on wireless and wired LANs
- B. use SSIDs to distinguish between wireless clients.
- C. send LWAPP packets to access points.
- D. register with a single access point that controls traffic between wired and wireless endpoints.
Answer: C
Explanation:
Lightweight APs (LAPs) is devices require no initial configuration. LAPs use the Lightweight Access Point Protocol (LWAPP) to communicate with a WLAN controller (WLC), as shown in the below figure. Controller-based APs are useful in situations where many APs are required in the network. As more APs are added, each AP is automatically configured and managed by the WLC.
NEW QUESTION # 326
An engineer is configuring data and voice services to pass through the same port. The designated switch interface fastethernet0/1 must transmit packets using the same priority for data when they are received from the access port of the IP phone. Which configuration must be used?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 327
Refer to the exhibit.
Which configuration on RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?
- A. access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any any line vty 0 15 ip access-group 100 in
- B. access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any any interface GigabitEthernet0/0 ip access-group 100 in
- C. access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any any interface GigabitEthernet0/0 ip access-group 100 in
- D. access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any any line vty 0 15 ip access-group 100 in
Answer: D
NEW QUESTION # 328
OSPF must be configured between routers R1 and R2.
Which OSPF configuration must be applied to router R1 to avoid a DR/BDR election?
- A. router ospf 1
network 192.168.1.1 0.0.0.0 area 0
hello interval 15
interface e1/1
Ip address 192.168.1.1 255.255.255.252 - B. router ospf 1
network 192.168.1.1 0.0.0.0 area 0
interface e1/1
ip address 192.168.1.1 255.255.255.252
ip ospf network point-to-point - C. router ospf 1
network 192.168.1.1 0.0.0.0 area 0
interface e1/1
ip address 192.168.1.1 255.255.255.252
ip ospf cost 0 - D. router ospf 1
network 192.168.1.1 0.0.0.0 area 0
interface e1/1
ip address 192.168.1.1 255.255.255.252
ip ospf network broadcast
Answer: B
NEW QUESTION # 329
A router received three destination prefixes:10.0.0/18, and 10.0.0/24. When the show ip route command is executed, which output does it return?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 330
Refer to the exhibit. An extended ACL has been configured and applied to router R2 The configuration farted to work as intended.
Which two changes stop outbound traffic on TCP ports 25 and 80 to 10.0.20.0/26 from the
10.0.10 0/26 subnet while still allowing all other traffic? (Choose two)
- A. The ACL must be configured the Gi0/2 interface in bound on R1
- B. The source and destination IPs must be swapped in ACL 101
- C. The ACL must be moved to the Gi0/1interface outbound onR2
- D. Add a "permit ip any any" statement to the beginning of ACL 101 for allowed traffic.
- E. Add a "permit ip any any" statement at the end of ACL 101 for allowed traffic
Answer: B,E
NEW QUESTION # 331
Drag and drop the application protocols from the left onto the transport protocols that it uses on the right
Answer:
Explanation:
Explanation:
NEW QUESTION # 332
Which two wireless security stewards use Counter Mode Cipher Block Chaining Message Authentication Code Protocol for encryption and data integrity? (Choose two.)
- A. Wi-Fi 6
- B. WPA
- C. WEP
- D. WPA2
- E. WPA3
Answer: D,E
NEW QUESTION # 333
Refer to the exhibit. Which type of route does R1 use to reach host 10.10.13.10/32?
- A. default route
- B. host route
- C. network route
- D. floating static route
Answer: C
Explanation:
From the output, we see R1 will use the entry "O 10.10.13.0/25 [110/4576] via 10.10.10.1, ..." to reach host 10.10.13.10. This is a network route.
Note: "B* 0.0.0.0/0 ..." is a default route.
NEW QUESTION # 334 
Refer to the exhibit. An LACP EtherChannel between two directly connected switches is in the configuration process.
Which command must be configured on switch SW2's Gi0/1-2 interfaces to establish the channel to SW1?
- A. channel-group 1 mode active
- B. channel-group 1 mode desirable
- C. channel-group 1 mode auto
- D. channel-group 1 mode on
Answer: A
NEW QUESTION # 335
Refer to the exhibit.
If OSPF is running on this network, how does Router 2 handle traffic from Site B to 10.10.13/25 at Site A?
- A. It load-balances traffic out of Fa0/1 and Fa0/2
- B. It cannot send packets to 10.10.13 128/25
- C. It sends packets out of interface Fa0/1 only.
- D. It sends packets out of interface Fa0/2 only.
Answer: B
Explanation:
Explanation
Router2 does not have an entry for the subnet 10.10.13.128/25. It only has an entry for 10.10.13.0/25, which ranges from 10.10.13.0 to 10.10.13.127.
NEW QUESTION # 336
What is a function of Wireless LAN Controller?
- A. monitor activity on wireless and wired LANs
- B. use SSIDs to distinguish between wireless clients.
- C. send LWAPP packets to access points.
- D. register with a single access point that controls traffic between wired and wireless endpoints.
Answer: C
Explanation:
Explanation
Lightweight APs (LAPs) is devices require no initial configuration. LAPs use the Lightweight Access Point Protocol (LWAPP) to communicate with a WLAN controller (WLC), as shown in the below figure.
Controller-based APs are useful in situations where many APs are required in the network. As more APs are added, each AP is automatically configured and managed by the WLC.
NEW QUESTION # 337
Drag and drop the DNS lookup components from the left onto the functions on the right.
Answer:
Explanation:
NEW QUESTION # 338
Refer to the exhibit. Which switch in this configuration will be elected as the root bridge?
SW1: 0C:0A:05:22:05:97
SW2: 0C:0A:A8:1A:3C:9D
SW3: 0C:0A:18:81:B3:19
SW4: 0C:4A:82:56:35:78
- A. SW3
- B. SW4
- C. SW1
- D. SW2
Answer: A
Explanation:
You can manipulate the Root Bridge Election by setting Bridge priority on your switches. The default value is 32768, and the lowest number is preferred. In the case of a tie, the switch with the lowest MAC address will be selected.
NEW QUESTION # 339
A device detects two stations transmitting frames at the same time. This condition occurs after the first 64 bytes of the frame is received interface counter increments?
- A. CRC
- B. late collision
- C. collision
- D. runt
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/interfaces-modules/port-adapters/12768-eth-collisions.html
NEW QUESTION # 340
Drag and drop the IPv6 addresses from the left onto the corresponding address types on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 341
......
Test Engine to Practice 200-301 Test Questions: https://skillmeup.examprepaway.com/Cisco/braindumps.200-301.ete.file.html