100% Guaranteed Results NCP-CI-AWS Unlimited 77 Questions [2024]
NCP-CI-AWS Dumps PDF - Want To Pass NCP-CI-AWS Fast
Nutanix NCP-CI-AWS Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 19
An administrator is planning an NC2 deployment and wants to connect to AWS Services privately from the corporate VPC without going through the public internet.
Which connectivity solution should the administrator use?
- A. Gateway Endpoint
- B. Site-to-Site VPN
- C. Point-to-Site VPN
- D. VTEP Gateways
Answer: A
Explanation:
Gateway Endpoint:
A Gateway Endpoint in AWS allows you to connect to supported AWS services privately without going through the public internet. This setup provides secure and efficient connectivity directly from the corporate VPC to the required AWS services.
Gateway Endpoints support services such as Amazon S3 and DynamoDB and are ideal for scenarios where private connectivity to these services is needed.
Reference:
Refer to the AWS documentation on VPC endpoints, specifically Gateway Endpoints, and the Nutanix documentation on configuring private connectivity for NC2 deployments.
NEW QUESTION # 20
An administrator needs to allow wide open access to one particular NC2 AWS cluster from an on-premises subnet of 10.19.160.0/24.
What is the proper Custom Security Group formatting to satisfy this task?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
To allow wide open access to a particular NC2 AWS cluster from an on-premises subnet (10.19.160.0/24), the proper Custom Security Group formatting needs to include the necessary tags that specify the external cluster UUID and the networks allowed.
Custom Security Group Configuration:
The configuration should include tags to identify the cluster and the networks that should be granted access.
Key: nutanix:clusters
Key: nutanix:clusters:external
Value: <cluster-uuid>
Explanation of Choice:
Option B includes the necessary tags and values, ensuring that the specific cluster UUID is recognized and the on-premises subnet (10.19.160.0/24) can communicate with the NC2 cluster.
Security Group Tags:
nutanix:clusters:external - Identifies the cluster as external.
nutanix:clusters:external:cluster-uuid - Specifies the unique identifier for the cluster, enabling proper traffic routing and access.
Reference:
Nutanix Cloud Clusters on AWS Administration Guide
AWS Security Group Documentation
Nutanix Best Practices for Custom Security Group Configuration
NEW QUESTION # 21
An administrator is tasked with providing VMs outbound internet connectivity in AWS.
Which components would the administrator need to create in the VPC to achieve this?
- A. Public Subnet NAT Gateway, Public EIP, Route Table
- B. Public Subnet Flow Gateway, Public EIP, Route Table
- C. Private Subnet NAT Gateway, Public EIP, Route Table
- D. Private Subnet Flow Gateway, Public EIP, Route Table
Answer: C
Explanation:
To provide VMs with outbound internet connectivity in AWS using a private subnet, the administrator needs to create the following components in the VPC:
Private Subnet: A private subnet is required to house the VMs that need outbound internet access but do not require direct inbound access from the internet.
NAT Gateway: A NAT (Network Address Translation) Gateway is necessary to allow instances in the private subnet to connect to the internet or other AWS services while preventing the internet from initiating a connection with those instances.
Public EIP (Elastic IP Address): An EIP is associated with the NAT Gateway to provide a persistent public IP address that allows outbound internet traffic from the private subnet to be routed correctly.
Route Table: A route table is configured to route traffic from the private subnet to the NAT Gateway for outbound internet access.
Reference:
AWS NAT Gateway Documentation
AWS VPC Subnet Basics
NEW QUESTION # 22
Which NC2 user role will allow full access to clusters created within an organization?
- A. Cluster Super Admin
- B. Cluster Administrator
- C. Organization Security Administrator
- D. Organization Administrator
Answer: D
Explanation:
In Nutanix Cloud Integration with AWS, specifically version 6.7, the role that allows full access to clusters created within an organization is the Organization Administrator.
The Organization Administrator role has the highest level of privileges within an organization, enabling the user to manage all aspects of the clusters, including creation, modification, and deletion.
This role is designed to oversee and control the entire organization's resources, ensuring comprehensive management capabilities over all clusters and associated resources.
Reference:
Refer to the Nutanix documentation on roles and permissions for NC2 on AWS for further details.
NEW QUESTION # 23
When configuring an alert email in Prism Central deployed within an NC2 environment, what is required in order for the emails to be sent properly?
- A. Cluster Super Admin permissions
- B. SMTP server configured in Prism Central settings
- C. A whitelisted public cloud console endpoint
- D. Name servers configured in Prism Central
Answer: B
Explanation:
To ensure that alert emails are sent properly from Prism Central within an NC2 environment, configuring an SMTP server in the Prism Central settings is required. The SMTP server facilitates the sending of email notifications for alerts and other communications.
SMTP Configuration:
Prism Central requires an SMTP server to send email alerts. This involves specifying the SMTP server address, port, and authentication details if needed.
The configuration must include the email address from which the alerts will be sent and the recipient addresses.
Steps to Configure SMTP Server in Prism Central:
Log in to Prism Central.
Navigate to the "Settings" menu.
Select "Email Server" under the "Alerts" section.
Enter the SMTP server details, including the server address, port, and authentication credentials.
Test the configuration to ensure emails are sent correctly.
Reference:
Nutanix Prism Central Administration Guide
Nutanix Support Documentation on Email Alert Configuration
Best Practices for Configuring SMTP Servers in Cloud Environments
NEW QUESTION # 24
Which interface must be used to deploy NC2?
- A. Foundation running in a Cloud Virtual Machine
- B. Prism Central Dashboard
- C. Cloud Provider portal
- D. NC2 Tile within the my.nutanix.com portal
Answer: D
Explanation:
The NC2 Tile within the my.nutanix.com portal is the correct interface to deploy NC2. This portal provides an integrated and user-friendly interface specifically designed for deploying and managing Nutanix Clusters on AWS.
NC2 Deployment Interface:
NC2 Tile within the my.nutanix.com portal: This portal provides the necessary tools and options to deploy and manage NC2 clusters. It includes functionalities for setting up the clusters, configuring network settings, and managing resources.
Advantages:
User-Friendly Interface: Simplifies the deployment process with a guided setup.
Integrated Tools: Provides access to all necessary tools for managing the deployment and monitoring of NC2 clusters.
Reference:
Nutanix Cloud Clusters on AWS Administration Guide
Nutanix my.nutanix.com Portal Documentation
Nutanix Best Practices for Cluster Deployment
NEW QUESTION # 25
An administrator is deploying an NC2 cluster into an existing AWS VPC.
The cluster deployment fails, with the following error message:
Why has the deployment failed?
- A. Outbound Internet access is not configured on the VPC.
- B. The administrator has not created the necessary Security Group.
- C. Shared subnets are not supported for Nutanix clusters.
- D. The administrator has not configured the Security Group to manage the shared subnet.
Answer: B
Explanation:
The administrator has not created the necessary Security Group:
The error message indicates that the creation of network interfaces in a shared subnet requires specifying a security group. This means that the necessary security group has not been created or assigned to the network interfaces.
Creating the appropriate security group and ensuring it is associated with the network interfaces during cluster deployment should resolve this issue.
Reference:
Refer to AWS documentation on security groups and network interface configuration and Nutanix documentation on prerequisites for deploying NC2 clusters in an existing AWS VPC.
NEW QUESTION # 26
To deploy NC2 in AWS using an existing VPC, which two AWS resources should be configured beforehand? (Choose two.)
- A. Bare-metal EC2 Instance
- B. Placement Group
- C. Public and Private Subnets
- D. NAT Gateway
Answer: D
Explanation:
To deploy NC2 in AWS using an existing VPC, the following AWS resources should be configured beforehand:
NAT Gateway: This allows instances in the private subnet to connect to the internet or other AWS services, while preventing the internet from initiating connections with those instances.
Public and Private Subnets: These are necessary to segregate the network traffic. Public subnets provide a direct route to the internet gateway, while private subnets are used for internal resources that do not need direct access to the internet.
Reference:
Nutanix Cloud Clusters on AWS Deployment Guide
Nutanix Support & Insights
NEW QUESTION # 27
An administrator has deployed an NC2 on AWS cluster that is running mixed workloads. Multiple SQL database are running on the NC2 cluster using a native subnet of 10.78.1.0/24.
The administrator wants to ensure only application servers from source subnet 10.79.1.0/24 that reside outside of the NC2 cluster can access the databases.
Which two actions will help the administrator most securely achieve this? (Choose two.)
- A.
- B.
- C.
- D.
Answer: A,C
Explanation:
To ensure that only application servers from the source subnet 10.79.1.0/24 can access the SQL databases running on the NC2 cluster in the subnet 10.78.1.0/24, the administrator can take the following actions:
Option A: Create a custom Security Group with the following rules:
Key = tag:nutanix:clusters
Key = tag:nutanix:clusters:external
and value = the clusters' UUID
Key = tag:nutanix:clusters:external
and value = 10.78.1.0/24
Option D: Create a custom Security Group with the following:
Key = nutanix:clusters
Key = nutanix:clusters:external
and value = the clusters' UUID
Key = nutanix:clusters:external
and value = 10.79.1.0/24
These actions help create security rules that restrict access to the databases only from the specified source subnet, ensuring secure and controlled access.
Reference:
Nutanix Cloud Clusters on AWS Administration
AWS Security Groups Documentation
NEW QUESTION # 28
Exhibit.
An administrator is attempting, but failing to create an NC2 cluster in AWS. The administrator checks the configuration in the NC and notices the configuration shown in the exhibit.
What action should the administrator take to resolve the issue?
- A. Restart Genesis on a Prism Central instance.
- B. Recreate the AWS CloudFormation stack.
- C. Create a new cloud account in the organization.
- D. Grant the administrator's account access to the NC2 organization.
Answer: C
Explanation:
The exhibit shows two cloud accounts, one for Azure and one for AWS, with their statuses indicated. The AWS cloud account status is marked as "U" (which likely stands for "Unavailable" or "Unreachable"). This indicates that the AWS cloud account configuration is not properly connected or accessible.
Status Check:
The AWS cloud account is marked with an "U" status, meaning it is not active or accessible.
This status prevents the creation of an NC2 cluster because the necessary cloud resources cannot be allocated or managed without a proper connection.
Action:
The best course of action is to create a new cloud account in the organization. This involves setting up the cloud account details correctly and ensuring it is properly configured to communicate with Nutanix and AWS.
Steps to Create a New Cloud Account:
Log in to the Nutanix console.
Navigate to the "Organizations" section.
Select "Add Cloud Account" and provide the required AWS credentials and permissions.
Ensure the new cloud account is active and correctly configured.
Reference:
Nutanix Cloud Clusters on AWS Administration Guide
Nutanix Best Practices for Cloud Account Management
NEW QUESTION # 29
A company needs to create virtual interfaces directly to public AWS S3 services. The company also wants to bypass any internet service providers in the network path.
Which method will best satisfy this requirement?
- A. SSH
- B. Direct Connect
- C. VPN
- D. Bastion Host
Answer: B
Explanation:
AWS Direct Connect allows companies to create private, dedicated connections between their data centers and AWS. This bypasses the internet and provides a more reliable and faster network connection directly to AWS services, including S3.
Reference:
AWS Direct Connect Documentation
AWS S3 Access over Direct Connect
NEW QUESTION # 30
The cluster is configured as follows:
* 8 nodes
* Prism Central Deployed
* Files Deployed
Following the deployment, the administrator experiences network connectivity issues.
Which reason explains the connectivity issues?
- A. The 192.168.5.0/24 range is not a valid CIDR range.
- B. The 192.168.5.0/24 range is reserved by IANA,
- C. The 192.168.5.0/24 range is reserved for internal cluster usage.
- D. The 192.168.5.0/24 range does not have enough IP addresses available.
Answer: C
Explanation:
The 192.168.5.0/24 range is often reserved for internal cluster communication within Nutanix deployments.
Using this CIDR range for other purposes could lead to network conflicts and connectivity issues, as it might interfere with the internal operations and communication channels of the Nutanix cluster.
Ensuring that the CIDR range is not overlapping with any reserved ranges is crucial for maintaining proper network connectivity and cluster functionality.
Reference:
Refer to the Nutanix documentation on network configuration and best practices for NC2 deployments to confirm reserved IP ranges and their appropriate use.
NEW QUESTION # 31
An administrator needs the permissions to create and manage multiple organizations and clusters in NC2, as well as manage user access for the entire company.
What role should be assigned to meet the minimum requirements of this task?
- A. Organization Administrator
- B. Customer Security Administrator
- C. Cluster Administrator
- D. Customer Administrator
Answer: D
Explanation:
The role of "Customer Administrator" in Nutanix Cloud Integration with AWS (NC2) is designed to meet the requirements of creating and managing multiple organizations and clusters, as well as managing user access for the entire company.
Roles and Permissions:
Customer Administrator: This role has the broadest set of permissions, allowing the user to create and manage organizations, clusters, and user access across the entire company. It encompasses administrative control over multiple aspects of the NC2 environment.
Capabilities:
Organization Management: Ability to create and manage multiple organizations.
Cluster Management: Full control over creating, configuring, and managing clusters.
User Access Management: Manage user roles and permissions, ensuring that the right individuals have access to the necessary resources.
Why Not Other Roles:
Organization Administrator: Limited to managing organizations but not clusters and user access at the company level.
Customer Security Administrator: Focuses on security aspects, lacking broader administrative capabilities.
Cluster Administrator: Limited to managing clusters without the ability to manage organizations and user access comprehensively.
Reference:
Nutanix Cloud Clusters on AWS Administration Guide
Nutanix Role-Based Access Control Documentation
NEW QUESTION # 32
An administrator planned to create a new NC2 cluster and chose the existing AWS VPC infrastructure in the workflow. The administrator need two private subnets to complete the configuration.
What are these two private subnets used for..
- A. For DNS and NTP management
- B. For user VMs and cluster management
- C. For private NAT and Elastic IP management
- D. For Prism Element and Prism Central management
Answer: B
Explanation:
The requirement for two private subnets in the NC2 cluster configuration workflow serves the same purposes:
One subnet is designated for user VMs, ensuring user workloads are separated from management operations.
The other subnet is designated for cluster management, maintaining the integrity and security of management processes and internal communications.
Reference:
Nutanix Clusters on AWS Deployment Guide
Nutanix Cloud Clusters on AWS Administration
NEW QUESTION # 33
When selecting the NC2 subscription plan from the Nutanix Billing portal, which options are available.
- A. Reserved Instances, Cloud Provider Credits, Bring your own License (BYOL)
- B. Pay-as-you-Go (PayG), Bring your own License (BYOL)
- C. Pay-as-you-Go (PayG), Cloud Provider Credits, Bring your own License (BYOL)
- D. Reserved Instances, Bring your own License (BYOL)
Answer: B
Explanation:
When selecting the NC2 subscription plan from the Nutanix Billing portal, the available options include:
Pay-as-you-Go (PayG): A flexible payment option where users are billed based on their actual usage, providing cost efficiency for variable workloads.
Bring your own License (BYOL): Allows users to utilize existing Nutanix licenses they have purchased, offering a cost-effective way to leverage existing investments in Nutanix software.
Reference:
Refer to the Nutanix billing and subscription documentation for detailed descriptions of subscription plans and their benefits.
NEW QUESTION # 34
An administrator is attempting to deploy an NC2 cluster.
The cluster configuration is as follows:
* Name - Cluster-1
* Nodes of type i4i.metal
* Replication Factor 2
* Existing VPC resources
* VPC - 10.0.0.0/16
* Subnets:
* Bare metal hosts: 10.0.1.0/24
* User VMs:10.0.2.0/24
* Public: 10.0.3.0/24
During the deployment process, the administrator notices the following alert:
What should the administrator do to ensure the cluster deployment does not fail?
- A. Modify the administrator's RBAC permissions in the NC2 console.
- B. Ensure an outbound Internet connection exists from 10.0.1.0/24.
- C. Check AWS VPC and subnet quotas for the cloud account.
- D. Create a new VPC and modify the cluster configuration to use the new VPC.
Answer: B
Explanation:
The alert indicates a potential issue with the VPC/Subnet settings, preventing the cluster nodes from contacting Nutanix services.
To resolve this, the administrator needs to ensure that the subnet 10.0.1.0/24, which is assigned for Bare metal hosts, has an outbound Internet connection.
This connection is necessary for the cluster nodes to communicate with external Nutanix services for updates, license validation, and other essential operations.
Verify that there are appropriate route tables and security group rules allowing outbound traffic to the Internet from the 10.0.1.0/24 subnet.
Ensure that there is either an Internet Gateway (IGW) attached to the VPC or a NAT Gateway configured if using private subnets.
Reference:
Refer to the Nutanix documentation and AWS VPC configuration guides to ensure proper Internet connectivity and routing setups.
NEW QUESTION # 35
In which two ways should an NC2 on AWS cluster be hibernated manually? (Choose two.)
- A. Select the cluster under NC2 console and Select Hibernate/Resume on the cluster sur page.
- B. Log into Prism, Central, navigate to Planning, find hibernate and resume.
- C. Log into NC2 console, find the cluster name and select Hibernate/Resume from the ellipses.
- D. Log into Prism Element navigate to Settings and select Hibernate/Resume.
Answer: A,C
NEW QUESTION # 36
How many Amazon Elastic Block Store(EBS) volumes are attached to each node within an AWS NC2 cluster upon creation.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Upon creation, each node within an AWS NC2 cluster has 3 Amazon Elastic Block Store (EBS) volumes attached.
These volumes are used for different purposes, such as operating system storage, Nutanix services, and user data storage.
The number of EBS volumes is designed to ensure adequate storage performance and capacity for the NC2 cluster's operations and workload demands.
Reference:
Refer to the Nutanix documentation on NC2 cluster setup and AWS EBS volume configurations to confirm the details on the number and purpose of EBS volumes attached to each node.
NEW QUESTION # 37
An administrator is seeking help with an ongoing NC2 issue. After reaching out to Nutanix support, the administrator is introduced to NC2 specialist who can help troubleshoot the problem.
- A. Add the specialist as an admin user to the organizations.
- B. Confirm the Support Authorization on the organization is set to Full Access.
- C. Provide the specialist with the administrator's login credentials.
- D. Ensure the specialist is assigned the RBAC role with proper permissions.
Answer: B,D
Explanation:
Ensure the specialist is assigned the RBAC role with proper permissions (Answer A):
Role-Based Access Control (RBAC) ensures that the specialist has the necessary permissions to troubleshoot and manage the NC2 environment. This avoids unnecessary privilege escalations and maintains security.
Confirm the Support Authorization on the organization is set to Full Access (Answer C):
Setting the Support Authorization to Full Access allows the Nutanix support specialist to have the required access to investigate and resolve issues in the environment. This is essential for effective troubleshooting.
Reference:
Nutanix RBAC Documentation
Nutanix Support Access Guide
NEW QUESTION # 38
......
Updated Verified NCP-CI-AWS Q&As - Pass Guarantee: https://skillmeup.examprepaway.com/Nutanix/braindumps.NCP-CI-AWS.ete.file.html