[Full-Version] 2025 Updated CheckPoint Study Guide 156-215.81.20 Dumps Questions
Newest 156-215.81.20 Exam Dumps Achieve Success in Actual 156-215.81.20 Exam
NEW QUESTION # 44
What are valid authentication methods for mutual authenticating the VPN gateways?
- A. PKI Certificates and DynamiciD OTP
- B. Pre-Shared Secrets and Kerberos Ticket
- C. Pre-shared Secret and PKI Certificates
- D. PKI Certificates and Kerberos Tickets
Answer: C
NEW QUESTION # 45
Fill in the blank: SmartConsole, SmartEvent GUI client, and ___________ allow viewing of billions of consolidated logs and shows them as prioritized security events.
- A. SmartMonitor
- B. SmartTracker
- C. SmartReporter
- D. SmartView Web Application
Answer: D
NEW QUESTION # 46
After the initial installation on Check Point appliance, you notice that the Management interface and default gateway are incorrect.
Which commands could you use to set the IP to 192.168.80.200/24 and default gateway to 192.168.80.1.
- A. add interface Mgmt ipv4-address 192.168.80.200 255.255.255.0add static-route 0.0.0.0.0.0.0.0 gw 192.168.80.1 onsave config
- B. set interface Mgmt ipv4-address 192.168.80.200 mask-length 24set static-route default nexthop gateway address 192.168.80.1 onsave config
- C. set interface Mgmt ipv4-address 192.168.80.200 255.255.255.0add static-route 0.0.0.0.0.0.0.0 gw 192.168.80.1 onsave config
- D. add interface Mgmt ipv4-address 192.168.80.200 mask-length 24add static-route default nexthop gateway address 192.168.80.1 onsave config
Answer: B
NEW QUESTION # 47
An administrator wishes to use Application objects in a rule in their policy but there are no Application objects listed as options to add when clicking the"+" to add new items to the "Services & Applications" column of a rule.
What should be done to fix this?
- A. The administrator should first create some applications to add to the rule.
- B. "Applications & URL Filtering" should first be enabled on the policy layer where the rule is being created.
- C. The "Application Control" blade should be enabled on a gateway
- D. The administrator should drag-and-drop the needed Application objects from the Object Explorer into the new rule
Answer: B
NEW QUESTION # 48
When an encrypted packet is decrypted, where does this happen?
- A. Inbound chain
- B. Security policy
- C. Decryption is not supported
- D. Outbound chain
Answer: B
NEW QUESTION # 49
True or False: More than one administrator can log into the Security Management Server with SmartConsole with write permission at the same time.
- A. False, only one administrator can login with write permission
- B. True, every administrator works on a different database that Is independent of the other administrators
- C. True, every administrator works in a session that is independent of the other administrators
- D. False, this feature has to be enabled in the Global Properties.
Answer: C
NEW QUESTION # 50
Where is the "Hit Count" feature enabled or disabled in SmartConsole?
- A. On each Security Gateway
- B. In Global Properties for the Security Management Server
- C. On the Policy layer
- D. On the Policy Package
Answer: C
NEW QUESTION # 51
Examine the sample Rule Base.
What will be the result of a verification of the policy from SmartConsole?
- A. Verification Error. Rule 4 (Web Inbound) hides Rule 6 (Webmaster access)
- B. No errors or Warnings
- C. Verification Error. Rule 7 (Clean-Up Rule) hides Implicit Clean-up Rule
- D. Verification Error. Empty Source-List in Rule 5 (Mail Inbound)
Answer: A
NEW QUESTION # 52
Which method below is NOT one of the ways to communicate using the Management API's?
- A. Sending API commands over an http connection using web-services
- B. Typing API commands from a dialog box inside the SmartConsole GUI application
- C. Typing API commands using the "mgmt_cli" command
- D. Typing API commands using Gaia's secure shell (clash)19+
Answer: A
NEW QUESTION # 53
You are asked to check the status of several user-mode processes on the management server and gateway.
Which of the following processes can only be seen on a Management Server?
- A. fwd
- B. fwm
- C. cpd
- D. cpwd
Answer: B
NEW QUESTION # 54
Which command shows detailed information about VPN tunnels?
- A. cpview
- B. vpn tu tlist
- C. cat $FWDlR/conf/vpn.conf
- D. vpn tu
Answer: D
NEW QUESTION # 55
Which message indicates IKE Phase 2 has completed successfully?
- A. Aggressive Mode Complete
- B. IKE Mode Complete
- C. Main Mode Complete
- D. Quick Mode Complete
Answer: D
NEW QUESTION # 56
Which tool allows for the automatic updating of the Gaia OS and Check Point products installed on the Gaia OS?
- A. CPDAS - Check Point Deployment Agent Service
- B. CPUSE - Check Point Upgrade Service Engine
- C. CPASE - Check Point Automatic Service Engine
- D. CPAUE - Check Point Automatic Update Engine
Answer: B
NEW QUESTION # 57
Which of the following is NOT a valid deployment option for R80?
- A. CloudGuard
- B. All-in-one (stand-alone)
- C. Bridge Mode
- D. Distributed
Answer: A
NEW QUESTION # 58
Which of the following is NOT a valid configuration screen of an Access Role Object?
- A. Time
- B. Users
- C. Machines
- D. Networks
Answer: A
NEW QUESTION # 59
What key is used to save the current CPView page in a filename format cpview_"cpview process ID". cap"number of captures"?
- A. S
- B. W
- C. Space bar
- D. C
Answer: D
NEW QUESTION # 60
What Identity Agent allows packet tagging and computer authentication?
- A. Light Agent
- B. System Agent
- C. Endpoint Security Client
- D. Full Agent
Answer: D
NEW QUESTION # 61
What is the BEST method to deploy Identity Awareness for roaming users?
- A. Share user identities between gateways
- B. Use Office Mode
- C. Use identity agents
- D. Use captive portal
Answer: C
NEW QUESTION # 62
SandBlast offers flexibility in implementation based on their individual business needs.
What is an option for deployment of Check Point SandBlast Zero-Day Protection?
- A. Load Sharing Mode Services
- B. Public Cloud Services
- C. Threat Agent Solution
- D. Smart Cloud Services
Answer: D
NEW QUESTION # 63
In SmartEvent, a correlation unit (CU) is used to do what?
- A. Analyze log entries and identify events.
- B. Send SAM block rules to the firewalls during a DOS attack.
- C. Receive firewall and other software blade logs in a region and forward them to the primary log server.
- D. Collect security gateway logs, Index the logs and then compress the logs.
Answer: A
NEW QUESTION # 64
......
Updated CheckPoint 156-215.81.20 Dumps – Check Free 156-215.81.20 Exam Dumps: https://skillmeup.examprepaway.com/CheckPoint/braindumps.156-215.81.20.ete.file.html