[Apr-2023] JN0-363 Exam Dumps, JN0-363 Practice Test Questions
Attested JN0-363 Dumps PDF Resource [2023]
Juniper JN0-363 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Exam Price | $300 USD |
| Passing Score | Pass / Fail (60-70% Approx.) |
| Exam Name | Service Provider Routing and Switching Specialist |
| Number of Questions | 65 |
| Recommended Training | Junos Intermediate Routing (JIR) Junos Service Provider Switching (JSPX) Junos MPLS Fundamentals (JMF) |
NEW QUESTION 86
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?
- A. The neighbor does not support IPv6
- B. The peer's AS number is misconfigured
- C. The TCP session is not establishing
- D. The update messages contain an unsupported option
Answer: B
NEW QUESTION 87
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to remove the tunnel interface from inet.0 after the hold-time expires
- B. to mark the tunnel up after the hold-time expires
- C. to reduce the risk of forwarding traffic through a stateless tunnel
- D. to mark the tunnel down after the hold-time expires
Answer: C,D
NEW QUESTION 88
When working with an MPLS LSP, what will the install 172.16.6.0/24 active command accomplish?
- A. The command will install the prefix in inet.0 rather than inet.3
- B. The command will swap the prefix from inet.0 to inet.3
- C. The command will install the prefix in inet.3 rather than inet.0
- D. The command will swap the prefix from inet.3 to inet.0
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/lsp-routes.html#id-21214
NEW QUESTION 89
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to remove the tunnel interface from inet.0 after the hold-time expires
- B. to mark the tunnel up after the hold-time expires
- C. to reduce the risk of forwarding traffic through a stateless tunnel
- D. to mark the tunnel down after the hold-time expires
Answer: C,D
NEW QUESTION 90
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B
Which routes will be advertised from Router B to Router D?
- A. BGP routes learned from Router A only
- B. BGP routes learned from Routers A and C only
- C. BGP routes learned from Router E only
- D. BGP routes learned from Routers A, C and E only
Answer: D
NEW QUESTION 91
Click the Exhibit.
You are using OSPF as your IGP in your network. You have applied the OSPF configuration shown in the exhibit to router R1.
Which statement is true in this scenario?
- A. Router R1 must be configured as a stub area for Area 0.0.0.0.
- B. Router R3 will not have a route to subnet 172.16.3.0/24.
- C. Router R2 will not have a route to subnet 172.16.4.0/24.
- D. Router R1 will send a default route to router R2.
Answer: B
NEW QUESTION 92
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B
Which routes will be advertised from Router B to Router D?
- A. BGP routes learned from Router A only
- B. BGP routes learned from Routers A and C only
- C. BGP routes learned from Router E only
- D. BGP routes learned from Routers A, C and E only
Answer: D
NEW QUESTION 93
Click the Exhibit button.
Which type of route is shown in the exhibit?
- A. static
- B. generate
- C. kernel
- D. aggregate
Answer: B
NEW QUESTION 94
Exhibit
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Prefixes in Level 2 will be redistributed to Level 1.
- B. Prefixes In Level 2 will be not redistributed to Level 1.
- C. Prefixes in Level 1 will be redistributed to Level 2.
- D. Prefixes in Level 1 will not be redistributed to Level 2.
Answer: A
NEW QUESTION 95
You are asked to assign interface xe-1/0/5 to a virtual switch. What must be accomplished to complete the configuration?
- A. Interface xe-1/0/5 must be added to routing-instance sw-1 vlan_2.
- B. Interface xe-1/0/5 must be added to routing-instance sw-1.
- C. Interface xe-1/0'5 must be a trunk port.
- D. An IRB interface must be configured to routing-instance sw-1 vlan_2.
Answer: B
NEW QUESTION 96
Click the exhibit.
You have configured OSPF between two routers. The OSPF adjacency will not form.
Referring to the exhibit, what is the problem?
- A. The router is not sending hellos on the configured interface.
- B. The OSPF version does not match on the configured interfaces.
- C. Router is not receiving hellos on the configured interface.
- D. The area does not match on the configured interfaces.
Answer: D
NEW QUESTION 97
Which two statements describe advantages of using BGP for VPLS signaling instead of LDP signaling? (Choose two.)
- A. There is no need for MPLS signaling protocol.
- B. There is a well-defined scaling hierarchy.
- C. There is a separation of signaling from other services.
- D. There is auto discovery.
Answer: B,D
NEW QUESTION 98
Click the Exhibit button. What does IS-IS/18 mean in the output displayed in the exhibit?
- A. These routes are internal Level 1 routes.
- B. These routes are internal Level 2 routes.
- C. These routes are external Level 2 routes.
- D. These routes are external Level 1 routes.
Answer: B
NEW QUESTION 99
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present
- B. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
- C. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
- D. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
Answer: A,B
NEW QUESTION 100
You are configuring a default static route using the default preference value. You want to ensure that any static route that you configure in the future will be less preferred than the OSPF routes that are configured on the network.
Which command will accomplish this task?
- A. set routing-options static defaults preference 20
- B. set protocols ospf preference 6
- C. set routing-options static defaults passive
- D. set routing-options static route <IP address> preference 9
Answer: A
NEW QUESTION 101
Click the Exhibit.
Referring to the exhibit, which statement is correct about MVRP?
- A. ES2 is not interested in VLAN 300.
- B. AS1's VLAN ID list is missing an entry for VLAN 300.
- C. AS1 is not allowing ES2 access to VLAN 300.
- D. ES1 is not advertising VLAN 300 to AS1.
Answer: A
NEW QUESTION 102
An IS-IS TLV includes which two attributes? (Choose two.)
- A. Topology
- B. Value
- C. Length
- D. Vector
Answer: B,C
NEW QUESTION 103
In a stateless IPv6 auto-configuration scenario, what is the host's IPv6 address if the interface's MAC address is 12:34:ab:cd:ef:56?
- A. fe80::1234:abcd:ef56/64
- B. fe80::1234:abff:fecd:ef56/64
- C. fe8::1234:abff:fecd:ef56/64
- D. fec0::1234:abff:fecd:ef56/64
Answer: A
NEW QUESTION 104
Your customer complains that their Layer 3 VPN is not passing traffic from one site to another. You assigned that customer to VPN-A. Which command on the PE router will confirm the presence of customer routes?
- A. show route table inet.3 VPN-A
- B. show route VPN-A
- C. show route table VPN-A.inet.0
- D. show route VPN-A table bgp.l2vpn.0
Answer: C
NEW QUESTION 105
Exhibit
Which two statements ate correct about the actions taken as the packet traverses the service provider MPLS network from Site 1 to Site 2 as shown in the exhibit? (Choose two.)
- A. R1 will perform a lookup using the lnet.3 table.
- B. R2 will perform a lookup using the mpls.0 table.
- C. R2 will perform a lookup using the inet.3 table.
- D. R1 will perform a lookup using the mpls.0 table.
Answer: B
NEW QUESTION 106
Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)
- A. R3 is considered a PE router.
- B. R3 is considered an ingress router.
- C. R3 is considered a transit router.
- D. R3 is considered a P router.
Answer: A,D
NEW QUESTION 107
......
Latest JN0-363 Actual Free Exam Questions Updated 265 Questions: https://skillmeup.examprepaway.com/Juniper/braindumps.JN0-363.ete.file.html