Effectiveness of our products

Your knowledge will be beefing up dramatically after using our HP0-Y51 practice materials. Unlike some irresponsible companies who churn out some practice materials, we are looking forward to cooperate fervently. Our experts have great familiarity with HP0-Y51 real test in this area. With passing rate up to 98 to 100 percent, we promise the profession of them and infallibility of our HP0-Y51 practice materials. So you won't be pestered with the difficulties of the exam any more. What is more, our HP0-Y51 exam torrent can realize your potentiality greatly.

Enthusiastic services

Some customer's services staff behave indifferently and politely without solving the deal problem all the time, we believe you must have experienced that before. However, we have inexorable resolution to offer help. In this knowledge times of developing potentiality, we integrated all merits into our HP0-Y51 practice materials we are in the front position if this industry like innovator as well as the most considerate services 24/7 for you. If you pass the exam by using our HP0-Y51 exam torrent, we will as happy as you are, but if you fail it unfortunately, we will give full refund back or switch other version for you free.

Striking achievements

Our HP0-Y51 practice materials have striking achievements up to now with passing rate up to 98-100 percent. Because we clearly understand your exam hinge on the quality of our HP0-Y51 real test. So we understand your worries. Some immoral companies' may cash in on you at this moment by making use of your worries. On the contrary, we admire your willpower and willing to offer the most sincere help. To have our HP0-Y51 exam torrent, this decision of you may bring stinking achievements in the future. The world is a fine place, and worth fighting for.

Dear customers we believe you must be a man of enterprising spirit for you have drive to pass this professional HP0-Y51 exam. The professional HP0-Y51 practice materials like ours with specialized content can help you infallibly pass it or you may lose your money and waste your time even energy at one swoop. A good beginning is half done, only when you have good way to head for, the rest will be easy to handle. So let us get to know our amazing HP0-Y51 real test that different from those products thoroughly.

DOWNLOAD DEMO

HP Building HP SDN and FlexNetwork Solutions Sample Questions:

1. A company is deploying an HP Unified Wired-Wireless controller solution with an HP BYOD solution. Guests will connect to an open Guest SSID and be redirected by their default gateway to a portal hosted by User Access Manager (UAM). The default gateway is a Comware routing device.
The administrator has set up portal authentication on the Comware device to implement the redirect. The administrator asks the BYOD solution designer about the correct RADIUS and domain settings for portal authentication on the switch. What should the BYOD solution designer explain to the administrator?

A) The administrator does not need to make any changes as long as the switch is managed by IMC. UAM will automatically access the managed switch and configure the correct settings.
B) The RADIUS scheme and domain must be configured with the same settings that would be used for traditional portal authentication to UAM. In addition, the RADIUS scheme must enable transparent MAC authentication.
C) These settings are not necessary because the UAM BYOD portal automatically handles the authentication and then forces the guest to reconnect the SSID and authenticate with MAC-Auth.
D) The RADIUS scheme and domain must be configured with the same settings that would be used for traditional portal authentication to UAM. In addition, the RADIUS scheme must use the standard server type.

2. Table of Acronyms
Exhibit 1 Exhibit 2


The switches shown in the exhibit are implementing SPBM. The administrator is now setting up interface ten1/0/1 to connect to a new VMware host. What is the correct port type and VLAN assignment for the interface?

A) Access port that permits the default VLAN
B) Trunk port that permits VLANs 10 and 20
C) Hybrid port than permits VLANs 201 and 203
D) Trunk port than permits VLANs 101 and 103

3. Table of Acronyms
An administrator is setting up an EVI solution on four HP Comware switches. The switches reach each other on these IP address:
-Switch1= 10.1.1.1 -Switch2= 10 2.2 2 -Switch3= 10.3.3.3 -Switch4= 10.4.4.4
The administrator wants to make Switch1 and Switch2 potential EVI Network Discovery Protocol (ENDP) servers. What is the proper configuration on the Switch1 EVI tunnel interface?

A) evi neighbor-discovery client enable 10.3.3.3 evi neighbor-discovery client enable 10.4.4.4
B) evi neighbor-discovery client enable 10.3.3.3 evi neighbor-discovery client enable 10.4.4.4
C) evi neighbor-discovery serverenable evi neighbor-discovery client enable 10.1.1.1
D) evi neighbor-discovery server enable evi neighbor-discovery client enable 10.2.2.2

4. Refer to the exhibit.

The HP Comware switch places VLAN 2, which is associated with 10 1.2.0/24, in OpenFlow instance 1. The switch supports IP routing and is configure with the default gateway IP address in VLAN 2. An SDN application has created the flow entry shown in the exhibit to route traffic from 10.1.2.0/24 to 10.1.3.0/24.
The exhibit does not show the output interface for the flow. Which output interface supports the needs of this scenario?

A) Normal
B) Any port in the controller VLAN
C) Controller
D) Any port that is a member of VLAN 2

5. Table of Acronyms

Refer to the exhibit.

An administrator is configuring an MPLS and VPLS Martini to connect customer Sites 1, 2, and 3. The administrator has created Virtual Switch Instance (VSI) "CustomerA" for this purpose.
How should the administrator connect customer Site 1 to the VPLS solution?

A) Create a service instance on g1/0/1. Also create a global cross-connect group, and bind the CustomerA VSI and the service instance in that group.
B) Create a service instance on the VLAN assigned to g1/0/1. Bind (cross-connect) that instance to the CustomerA VSI.
C) Create a service instance on the VLAN assigned to g1/0/1. Also create a global cross-connect group, and bind the CustomerA VSI and the service instance in that group.
D) Create a service instance on g1/0/1. Bind (cross-connect) that instance to the CustomerA VSI.

Solutions: